N267 SEWAGE PUMP 1/2HP CI/PL NON-AUTO 115V 2

PART ZOE 267-0002

SUPPLIER Zoeller®

SUPPLIER PART # 267-0002

Calculating price...

QUANTITY

About this item

Zoeller® Submersible Pump, Non-Automatic/Manual Operation, Series: Waste-Mate 260, 128 gpm Flow Rate, 2 or 3 in NPT Outlet, 21-1/2 ft Maximum Head, 1/2 hp, 115 VAC, 10.4 A, 60 Hz Frequency, 1 ph ph, 1750 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Auto Reset Thermal Overload Enclosure, Sleeve Bearing, Cast Iron, 14-5/16 in H Dimensions

Considered one of America's most popular sump pumps. This robust family of sump pumps is known for reliability, durability and performance. The preset, integral snap-action float switch is engineered for one million mechanical starts. The heat-dissipating cast iron body with epoxy powder coated finish provides maximum pumping performance under the most extreme conditions. With Zoeller® cool run design, the hermetically sealed, oil-filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product.

cCSAus Certified|CSA C22.2 108|SSPMA Certified|UL 778

Amperage Rating 10.4 A

Bearing Type Sleeve

Cord Type 3-Wire Neoprene

Dimensions 14-5/16 in H

Enclosure Type Auto Reset Thermal Overload

Flow Rate 128 gpm

Frequency Rating 60 Hz

Horsepower 1/2 hp

Impeller Type Non-Clogging Vortex

Material Cast Iron

Maximum Head 21-1/2 ft

Motor Speed 1750 rpm

Outlet Size 2 or 3 in NPT

Phase 1

Series Waste-Mate 260

Temperature Rating 130 deg F

Type Non-Automatic/Manual Operation

Voltage Rating 115 VAC

Brand Zoeller®

Country of Origin US

Float operated 2-pole mechanical switch

Durable cast construction, ASTM Class 25 cast iron switch case and pump housing

Non-clogging vortex impeller design, engineered plastic impeller with metal inserts (1 ph)

Not affected by materials normally found in drainage and sewage pumps

Stainless steel screws, bolts, handle, guard, arm and seal assembly

Neoprene square ring and gasket

Oil filled, hermetically sealed motors

Oil-lubricated bearings

Carbon and ceramic shaft seal

Corrosion-resistant, powder coated epoxy finish

Completely submersible

Watertight and dust-tight

Automatic reset thermal overload protection (1 ph only)

12 in on point, 4 in off point

High water alarms available

10 in auto/15 in non auto, 3-wire neoprene cord and plug

Cap/motor housing/pump housing cast iron, base cast iron or engineered plastic

Upper and lower sleeve bearing

Engineered plastic with metal insert impeller, Stainless steel hardware, AISI 1215 cold rolled steel motor shaft, Neoprene gasket

Submersible sewage/effluent or dewatering pump

Catalog

Instruction/Installation Manual

Specification Sheet

Line Drawing

N267 SEWAGE PUMP 1/2HP CI/PL NON-AUTO 115V 2

About this item

Related Products

Recently Viewed Products